DOC / 05

SUPPORT

For help with Tick96, write to hello@hanamelsystems.com. Support requests are answered within 24 hours. A support report from the app, described below, allows most problems to be resolved in a single reply.

05.01 / REPORT A PROBLEM

  1. In Tick96, choose Help → Report a Problem… An e-mail addressed to support opens with a support report attached.
  2. Describe what happened and what you expected, and state your MPC model, boot media and MIDI interface.
  3. For connection problems, first enable Help → Detailed Logging (for Support), repeat the step that fails, then choose Report a Problem… Detailed logging is switched off automatically when Tick96 quits.

If no e-mail application is configured on the Mac, choose Help → Create Support Report…, save the file and attach it to an e-mail to hello@hanamelsystems.com.

The support report contains the Tick96 log, the Tick96 and macOS versions, the Mac model, the names of the MIDI ports and the last state shown by the editor. The license key is masked. The report leaves the Mac only when you send the e-mail.

05.02 / THE MPC DOES NOT START THE TICK96 OS

  1. MPC2000XL: hold REC + OVER DUB while switching the MPC on, until “Loading” appears. Without these keys the MPC starts its original OS.
  2. ZuluSCSI: copy HD0.img and zuluscsi.ini to the root of the SD card. No other file on the card may have a name beginning with HD. The MPC boots only from SCSI ID 0. Power the ZuluSCSI before switching the MPC on.
  3. BlueSCSI: copy HD0.img to the root of the SD card and rename it HD00_512.hda. The .ini file is not needed. This route has not yet been tested on hardware.
  4. Gotek or floppy: use the image in the “Floppy or Gotek” folder. A Gotek running its original firmware requires the image to be written to a slot with the Gotek’s own tool.
  5. HxC: convert the same image to an .hfe file with the HxC Floppy Emulator software and copy it to the SD card. This route has not yet been tested on hardware.
  6. CF card in a plain IDE adapter: suitable for storage; the MPC2000XL cannot boot from it.
  7. MPC2000: on a copy of your boot disk, replace MPC2000.EXE with the file created by Tick96. MPC2000.SYS remains the original file. The start-up screen then shows “MPC2000 T96”.
  8. If the LOAD screen of the MPC2000XL shows MPC2KXL.BIN with DO IT, do not press DO IT. This is the MPC’s own OS update function; Tick96 does not use it.

05.03 / CREATE BOOT MEDIA REFUSES THE FILE

Tick96 patches only the exact, unmodified factory file: MPC2KXL.BIN of OS 1.20 for the MPC2000XL, or MPC2000.EXE of OS 1.72 for the MPC2000. Any other version, and any file modified by another patch, is refused and nothing is written.

05.04 / TICK96 DOES NOT CONNECT

  1. Cabling: interface MIDI OUT to MPC MIDI IN 1; MPC MIDI OUT A to interface MIDI IN.
  2. The MPC must be stopped. It does not answer while it plays or records.
  3. Choose Setup → Test connection. The result states whether an MPC running the Tick96 OS answers, and which model it is.
  4. The MIDI interface must pass System Exclusive messages in both directions. Some low-cost USB MIDI cables do not.

05.05 / EDITS ARE REFUSED OR RECORDED TAKES DO NOT APPEAR

  1. Tick96 edits only while the MPC is stopped and on its Main screen. Press MAIN SCREEN on the MPC and repeat the edit.
  2. Takes recorded on the MPC appear automatically when Sync Out is set to MIDI CLOCK on the MPC. Otherwise, choose Re-read in Tick96.
  3. MPC2000XL: choose Commit to MPC before switching to SONG mode. The MPC discards uncommitted edits when it enters SONG mode.

05.06 / LICENSE AND ACTIVATION

  1. The license key is in the order e-mail. Enter it under Tick96 → License… Activation requires an internet connection once; afterwards Tick96 works offline.
  2. One license key activates Tick96 on two computers of the licensee. To move an activation to another computer, send the license key to support; the activation count is then reset.
  3. Updates are downloaded through the link in the order e-mail. The license key does not change.

The full terms are set out in the Tick96 license agreement.

05.07 / FEATURE REQUESTS

Feature proposals are collected and voted on at the proposals board. Questions about a purchase, and problems on a specific setup, are handled by e-mail.